Making That Perfect Arts And Crafts Dream Catcher

Being bothered by nightmares? Native Americans believe that bad dreams can become caught in the web of a dream catcher and destroyed in the morning light. Dream catchers are so beautiful and artistic that they have become one of the most popular mass marketed arts and crafts available. However, these lovely pieces can be made at home. In this article, we'll demonstrate how to make a dream catcher yourself.

Dream catchers were originally made out of willow, sage and deer sinew. Modern dream catchers are made with wood or metal wrapped in leather strips and artificial sinew. The decoration of the web along with the shape, size and colors used is left to the artistic tastes of the individual.

Feathers attached to the dream catcher are meant to assist the flight of good dreams. Although selecting the materials is usually a matter of preference, typically to make a dream catcher you will need about 7 feet of thin suede, glue, a 6 inch metal or wooden ring, waxed nylon string, 12-16 pony beads, 12-16 feathers, scissors and a clothes pin. The colors of the beads and feathers can be any you choose.

The most difficult thing about the arts and crafts project of making dream catchers is making the web. Once you have covered the hoop with leather or suede and the glue has dried completely, tie a long strand of sinew or another piece of suede onto the hoop with a secure knot.

Carefully work your way around the hoop making a slip stitch at about every inch, or inch and a half. Ideally, the spaces should be uniform but don't worry if they are not perfect. Once you get back to the top, slip stitch into the first loop that you made and repeat the process until you have just a small hole in the center. If you want to make your dream catcher more decorative, you can slip beads onto the web as you go. Tie a knot at the end and cut off any excess material.

To make the loop to hang your Dream Catcher, use a 12" piece of suede lacing. Fold it in half and tie a knot in the open end. At the top of the ring, attach the lacing and slip the loop end through the ring and then around the ring and over the knot. Pull the lacing tight to secure it in place.

To make the hanging sections, cut three 8" pieces of suede. Tie two 8" pieces of suede lacing about one third of the way up each side of the ring using a double knot. Slip 3 colored pony beads onto each piece of lacing and secure with a knot. Tie the last 8" piece of lacing to the top middle of the ring. Slip three pony beads onto each piece of lacing. Finally, push two feathers up inside the beads on each piece of lacing.

Arts and crafts make wonderful presents and a homemade dream catcher is an especially thoughtful present. It make take some practice to get the weaving right, but the effort is worth it.

As you get more experience with the craft of making dream catchers, you can experiment with different colors of suede and leather, beads, feathers and ring sizes. As with all of the artistic craft projects you may undertake, no two pieces need to look the same.

Seed Newsvine

Bookmark this article in your preferred program

Comments

Add Comment

Popular Articles in this cathegory

This article is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License.