Category: Top » Home » Home-improvement »


Author: rnoel1 | Total views: 11 Comments: 0
Word Count: 678 Date: Wed, 21 May 2008 6:58 PM

Discount Kitchen Cabinets vs. Kitchen Cabinet Refacing

A complete set of kitchen cabinets can start at around $800 at the bottom of the line for discount kitchen cabinets and go all the way up to $100,000 for a high quality set.

To estimate the costs of your kitchen cabinets measure the length of the area that will have base cabinets, the ones that sit on the floor, and the length of the wall cabinets.

Add these two numbers together and you have the number of lineal feet of required cabinets. If it is your intent to install a pantry or other cabinet that is floor to ceiling, include the length dimension in both the base and wall cabinet number.

Most home centers and kitchen cabinet specialty retailers will post an average lineal price for each design and quality. The price per lineal foot does not include the countertop or cabinet installation.

The lineal foot price indicated is usually based on a 10-foot long, straight wall configuration, (no corner cabinets required or glass doors). It will not include any trim or cabinet options and in most cases will not include doorknobs, or drawer pulls. Unless specifically indicated the price will not include installation.

As a rule of thumb, you can double the lineal foot price of the cabinets to arrive at the total cost of the project, installed.

The lineal per foot cost is in the doors and hardware. Doors can be made of veneered MDF or hardwoods that are richly stained. Luxury door hardware, such as hinges, knobs, and pulls can add as much as $50 to the price of a specific cabinet.

Drawer slides are also an important price driver. Quality drawer slides make a major difference to the price of a cabinet.

When you are shopping for your cabinets, pay special attention to the hardware that is used and fabrication techniques. Make sure you are comparing similar qualities when looking at best price.

Knowledge and planning are the keys to a successful home remodel project.

Kitchen cabinets have an enormous spread in pricing from $80 a lineal foot for laminate faced, self-assembly to $300 a lineal foot for hardwood doors, glass insets, and ceiling trims.

Because of this spread in price, it is important to set a top amount that you can afford. Then you consider the cabinet designs available up to that price point.

If your cabinets are in good shape, or at least the frame is in good shape, and you like the configuration, consider replacing just the doors. Combined with a refinishing job on the frame, this option can give you a whole new look at a fraction of the cost of new cabinets.

The choices are simple when it comes to doors: replace them completely, refinish your existing doors or do a combination of both.

Replacing your doors is quite self-explanatory; unless you have strangely designed custom-built doors, door sizes are standard and replacements will be easy to find at any good home renovation store or cabinet manufacturing company.

Judge replacement doors just as you would the entire cabinets. Look for quality materials and excellent finishes.

Another option is kitchen cabinet refacing. kitchen cabinet refacing involves removing your kitchen cabinet doors and drawers and resurfacing them with wood or laminate veneer. The newly refaced doors and drawer fronts are then mounted using new hinges and pull.

For the best look, the interior edges of the face frame should also be faced, or at least completely sanded and refinished. This process is much less expensive than replacing your kitchen cabinets, yet provides a fresh updated look.

The cost of having the average kitchen refaced by a professional kitchen cabinet refacing company can run between $2500-$5000 depending on the size, number and layout of the existing cabinets, and is considerably less than replacing the whole kitchen. Kitchen cabinet refacing can usually be done in about 3-5 work days.

About the Author

Rebecca Noel is a licensed real estate agent and real estate investor. Remodeling houses and home improvement diy are her area of interest. Find out insider information that will save you $1000's on materials and help you get your remodeling projects done weeks faster at Remodeling Recon.




Rate, comment or bookmark this article

Seed Newsvine

Rating: Not yet rated

Bookmark this article in your preferred program
AddThis Social Bookmark Button

Comments RSS

No comments posted.

Add Comment

Your Name:


Your Email:


Comment

Enter the code shown

Visual CAPTCHA



Popular Articles in this cathegory

1: How to Cantilever Deck Beams and Joists
Deck building is a polular do-it-yourself project with homeowners who can take advantage of how-to-do-it clinics and tools rentals at home improvement retail outlets to construct the decks of their dr..

2: 3 Deck Skirting Solutions
In the construction of a deck homeowners tend to spend most of their money and energy on the deck framework, decking, railing system and steps. One key vertical element is often neglected - the skirti..

3: How to Build an Above Ground Pool Deck
Combining a deck with an above ground pool can bring out the best of both. A deck not only provides easy access to the pool but also helps it to blend into the landscape of a backyard. The above groun..

4: How to Drill Large Diameter Holes in Wood
Drilling holes up to 3/8" in diameter is usually fairly simple since most of the time you can do it with ordinary twist drill bits. Larger holes require more specialized bits and techniques.

5: Building A Homemade Wind Turbine - The Answers You Need Now
Homemade wind turbines are, by far, one of the most popular forms of renewable energy. It is also easy to build a wind generator. The average person only needs 2 days, a few simple tools and instructions. It is also the most cost-effective way to utilize renewable energy.


Creative Commons License
This article is licensed under a Creative Commons Attribution-Noncommercial-No Derivative Works 3.0 License.
Spanish taslation