Category: Top » Technology » Electronics »

All About The Emerging DVD Technology

The music consumers entered a new era in the 1980s, when they were first introduced to the digital medium of CDs. On the motion picture side, the home consumers were glued to the VHS (video home system) tape till the 1980s. This was also non-digital but gradually the digital VCDs replaced the VHS in the late 1980s.

Movie companies were not happy with the CDs that were available and they worked on various digital video formats to develop a product that would give improved visual and audio quality to the home consumers. The result was the development of the DVD. The DVD technology originated in the early 1990s and in no time entertainment giants like Time-Warner and Sony realized its potential and agreed to promote the new high quality technology.

DVD stands for digital versatile disc although it is popularly referred to as Digital Video Disc due to the popularity of the video industry. The main reason for the popularity and growth of DVDs is that DVD technology allows for the storage of a large amount of data using digital technology.

At present, a DVD offers about 480 lines of resolution, which is double the 20 lines of the VHS format. The 480 lines is best seen on a progressing DVD player which can convert the 40 interlaced video into 480 line progressive format. The advantage of this is that the progressive display has a 31.5 kHz or higher scans rate. This eliminates all traces of scan delay and provides a more film like picture.

DVD technology differs a lot from that of the CD though the technology may appear alike to a layman. A DVD is made of a thin, circular wafer of clear plastic and metal measuring 4.75 inches in diameter with a small hole in the center. The thickness is 0.2 inches and two such discs are compressed together to create a double-sided disc 0.04 inch thick.

The digital data, which consists of the binary language of ones and zeros, is encoded onto a master disc and this master disc is then used to create self-copies. The copying is done by burning small holes, called pits, into a microscopic layer of metal, usually aluminum, with the help of a laser. These pits are the binary ones. Binary zeroes are the smooth surface of the layer of metal, which has not been touched, by the metal binary zeros. After this the metal is coated with a protective transparent layer.

There are five physical formats used in DVD Technology. The most important is the DVD-ROM. It stores general data as well as video and audio information needed for multimedia applications and computer games.

One of the reasons for the success of DVD technology is the DVD video format. DVD video application is strongly dependent on data compression since at the bit rate of 167Mbps, the 4 GB capacity of a standard DVD would be enough to store roughly 4 minutes of digital video. This provides for the nominal 133 minutes of playing time for DVD 5.

The DVD 9, which uses dual layer technology, is ideal for longer movies. In this case, the data on the first layer starts at the inside of the disk and ends at the outside, whereas, the data on the second layer starts on the outside and ends inside thus providing uninterrupted playback.

Seed Newsvine

Rating: Not yet rated --Choose-- 0 1 2 3 4 5

Comments

No comments posted.

Add Comment

Your Name:


Your Email:


Comment

Enter the code shown

Popular Articles in this cathegory

1: Fallout 3 Walk Through Starter Guide
2: The Portable HF Antenna. What Makes A Physically Small Antenna Work Right For Two Way Radio?
3: The History Of The Walkie Talkie
4: Rechargeable Battery Basics: Long-Term Storage
5: Repairing Your Washing Machine Yourself