Technology Subcategories
Technology Articles
January 24 2008: Reverse Osmosis Process in Manufacturing by: chiron99
The Reverse Osmosis water purification process is applied in several different industries to improve water quality. Water purified via reverse osmosis, is higher in quality, which allows the user to increase efficiency in their manufacturing process.
January 24 2008: Parts Cleaner Gravimetric Testing Procedures by: chiron99
Increasingly tight cleanliness specifications make it difficult to know when a part is clean without a reliable testing method. Contamination on parts is often very small material, not visible to the eye, and therefore an objective method is necessary to properly evaluate whether or not a part is ready to be shipped or moved to the next step in the production process.
January 24 2008: Bluetooth Wireless Keyboard Is Now The Future by: nbisea
Bluetooth wireless keyboard will become the standard, rather than an option.
January 23 2008: The War between DVD and HD DVD by: vgevge
The article speaks about DVD and HD DVD. It tells about how HD DVD is yet to replace DVD in the market, although many big houses are supporting the HD DVD implementation due to more storage space.
January 21 2008: Free Your Hands With Bluetooth Wireless Headsets by: nbisea
Bluetooth wireless headsets allows you to keep up your conversation while being able to keep your hands busy and productive.
January 20 2008: Making Life Easier With Bluetooth Technology by: nbisea
Some are still mystified about exactly what bluetooth technology means.
January 20 2008: Ig Nobel Prizes: Science Research that is Funny by: jreidergp@gmail.com
Here you can read about some of the most unnecessary researches that were awarded the Ig Nobel Prize.
January 17 2008: The Convenience Of Bluetooth Enabled Phones by: nbisea
Bluetooth enabled phones are becoming the standard in wireless technology.
January 16 2008: How To Improve Your Car Stereo With New Speakers by: vgevge
Knowing how to improve your car stereo new speakers you need to understand that music itself is made up of a wide range of frequencies. There is no one size of any speaker that can reproduce the total frequencies at best.
January 13 2008: All About Repairing Scratched DVD by: vgevge
The article discusses how to repair discs at home and how to take care of them. They need to be taken tender care of before and after destruction.
January 13 2008: Prevention from Buying a Pirated DVD by: vgevge
Piracy of DVDs is a crime. It is advised not to buy and use Pirated DVDs. User of pirated DVDs may be penalized with heavy fine or imprisonment. Only licensed software s be used and copying the same is prohibited.
January 09 2008: Examination Of Online And Wireless Services by: ergo_items
A consumer will not be able to make a true examination of online and wireless services of any cellular telephone service provider until they receive a huge cellular telephone bill that was not in the monthly budget.
January 07 2008: Science and Technology by: venkat
Technology is a broad concept that deals with a species' usage and knowledge of tools and crafts, and how it affects a species' ability to control and adapt to its environment. In human society, it is a consequence of science and engineering, although several technological advances predate the two concepts.
December 30 2007: High Pressure Washer: Is Water De-Burring for You? by: chiron99
High pressure de-burring utilizes water jet streams from 3,000 to 7,500+ psi to knock unwanted burrs from finished parts. By processing cast, cut or bored parts through a high pressure system, companies are able to create high quality, consistently finished parts each time with no possibility of diminished effectiveness. High pressure de-burring operations though, do have limited applications.
December 30 2007: Challenges in Metal Cleaning for Tube and Pipe Benders by: chiron99
Tube benders experience more challenges when it comes to cleaning their product than most other metal formers. Tubes present a challenge for cleaning, due to the viscosity of the lubricant used to protect the metal during the bends as well as the variations in shapes, tube diameters and orifice orientation.
December 30 2007: What You Need To Know To Buy A Parts Washer by: chiron99
Buying a new production part washing system can be an overwhelming experience. With all the options and decisions to make, it is easy to overlook important details and end up with an unsatisfactory machine. The key decision to be made before purchase is what level of cleanliness will this equipment be expected to achieve.
December 28 2007: Fuel Saving Products by: bweiss
With the continual rise of gas prices it has become a wise decision to buy a car that saves fuel.A statistic says that as many as fifteen percent of car buyers reject a certain car model because they are not satisfied with its fuel saving features.
December 23 2007: Schools Aren't What They Used To Be by: Galway
A look at the use of overhead projectors in modern schools.
December 23 2007: The Truth about Hydro De-Burring in the Parts Cleaner Process by: chiron99
Complex aluminum parts often leave behind burrs during the manufacturing process. Burrs can be located deep within tough to reach holes, or in more accessible locations along grooves. No matter where they are located, it is necessary to remove these burrs before the product is finished.
December 23 2007: How to Maintain and Clean Your Parts Washer by: chiron99
A washer works hard to ensure that parts come out clean and ready for the next production process. To keep the machine working at a high level, it must be cleaned on a regular basis. The contamination removed from the parts does not magically disappear; it builds up in the tank and can greatly reduce performance.
December 23 2007: Metal Cleaning: Washing Long Aluminum Skin Panels by: chiron99
Large, aluminum door panels can be difficult pieces to clean. Used in many applications, including the construction of the United States Army 's Hummer vehicle as a skin to be placed over the armor plate frame, these panels need to be cleaned quickly and efficiently.
December 23 2007: Parts Cleaner Specifications for Production Part Manufacturers by: chiron99
For production part manufacturers, cleaning specifications are a major concern when setting up a line. Cleaning specifications have numerous effects on production, planning, and the ultimate success of a job. They set the parameters for the type of washer that will be used...
December 23 2007: Industrial Parts Cleaner Specifications and Standards by: chiron99
As the parts cleaning industry advances in technology and application, standards are becoming tighter in all industries. Increasing expectations and accountability from automotive manufacturers have led to cleanliness specifications becoming more strict, resulting in cleaner parts. While clean parts are always good, diminishing returns are a concern with strict specifications.
December 23 2007: Parts Cleaner: Firbimatic Sealed Perchlorethlyne Cycle by: chiron99
The Firbimatic washer allows manufacturers to use solvent cleaning in their plants while still adhering to environmental regulations in place to limit solvent use. The Firbimatic is designed with these specifications in mind, and controls the environmental impact of the solvent used.
December 23 2007: Metal Cleaning: Environmental Impact of Hermetically Sealed Solvent Degreasing by: chiron99
Organic solvents have long been considered to be the best option for removing contamination from metal parts. This is due to a range of factors. Among these include repeatable high levels of surface cleanliness, ability to remove a wide range of soils, and reduced cycle times.
Page 5 of 10
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
Tags: Technology
